![]() Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
#1
|
|||
|
|||
![]()
Thanks for the replies. Does TorqTech and Pypes mount up to the stock locations? I really don't want to put any new holes in the car to hang the exhaust.
|
#2
|
|||
|
|||
![]()
Check out Spintechs out of So-Cal. I used Hooker SuperComps with 2 1/2" Stainless Oval tubing and Spintechs. Sounds killer!
|
#3
|
|||
|
|||
![]()
__________________
Tony 55 Nomad Gasser 70 SS 427 Nova 34 Ford Sedan..Hemi powered Michigan/ Florida |
#4
|
|||
|
|||
![]()
Listen to Budnate! Go with the Pypes setup...they make a couple different mandrel systems that use the stock mounts, and uses a sweet transverse muffler, and you can add an x-pipe...will handle BIG power and still sounds KILLER.
|
#5
|
||||
|
||||
![]()
Gotta go with the Pypes setup, it will look stock, install at the stock points, and pretty much sound stock until you stand on it - what's not to like
![]()
__________________
Marlin 70 Yenko Nova-350/360, 4speed M21, 4.10 Posi (Daddy's Ride) 69 SS Nova-396/375hp, 4speed M20, 3.55 Posi (Benjamin's Ride) 67 RS Camaro-327/250hp, 2speed Glide, & 3.08 Open (Danny's Ride) |
#6
|
|||
|
|||
![]()
I emailed the Pypes representative and he told me that the exhaust will not hang from the stock mounting locations. Did you guys make your own hangers? And, are you using the transverse muffler like the factory system? Thanks for the help.
|
#7
|
||||
|
||||
![]()
I'm having them install mine in a few weeks, but from I've read and talked them - it should be using the stock locations for the hangers. I'm not sure why the system wouldn't use the stock locations
![]()
__________________
Marlin 70 Yenko Nova-350/360, 4speed M21, 4.10 Posi (Daddy's Ride) 69 SS Nova-396/375hp, 4speed M20, 3.55 Posi (Benjamin's Ride) 67 RS Camaro-327/250hp, 2speed Glide, & 3.08 Open (Danny's Ride) |
![]() |
|
|