15 X 8 Chevy Rally Wheel backspacing

tmilecki · #1 06-19-2006, 06:31 PM

They do a great job. I have a set of 8s in the garage that are non factory. I will check the back spacing.

Tony

indyjps · #2 06-21-2006, 01:46 AM

all of the 8" rallleye ive seen are 4" backspacing factory. i ran a set of 8" on the back and 5" on the front for a while and they never looked right, the skinnys were buried in the front and the 8" hung out. went to weld draglites (it was '93)

**BillD** · #3 06-23-2006, 05:50 PM

Indyjps hit the nail on the head. That is my problem; the 15x8's have the tires hanging out of the wheel wells on my 68 Camaro. I picked up the repro rallys which can be ordered with a deeper back space but the problem is that the center section on these don't look like the originals and I am not going to run caps. Is there anyone out there that can take apart an original rally wheel and make a custom back spaced wheel?

VintageMusclecar · #4 06-23-2006, 10:38 PM

Maybe Stockton Wheel?

**BillD** · #5 06-26-2006, 07:45 PM

Thanks for the tip. Stockton wheel will do it.

Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars.