15 X 8 Chevy Rally Wheel backspacing
 

I am mounting up a set of 10" wide slicks on 15 X 8 chevy rallys. Do all chevy rallyes have 4" back spacing? I really would like a set of 15 x 8's with more back spacing to keep the tires tucked in on the wheel wells on a 68 Camaro. I see Wheel Vintiques makes custom back spaced rally's, anybody have any experience with them?

thanks

Re: 15 X 8 Chevy Rally Wheel backspacing
 

They do a great job. I have a set of 8s in the garage that are non factory. I will check the back spacing.

Tony

Re: 15 X 8 Chevy Rally Wheel backspacing
 

all of the 8" rallleye ive seen are 4" backspacing factory. i ran a set of 8" on the back and 5" on the front for a while and they never looked right, the skinnys were buried in the front and the 8" hung out. went to weld draglites (it was '93)

Re: 15 X 8 Chevy Rally Wheel backspacing
 

Indyjps hit the nail on the head. That is my problem; the 15x8's have the tires hanging out of the wheel wells on my 68 Camaro. I picked up the repro rallys which can be ordered with a deeper back space but the problem is that the center section on these don't look like the originals and I am not going to run caps. Is there anyone out there that can take apart an original rally wheel and make a custom back spaced wheel?

Re: 15 X 8 Chevy Rally Wheel backspacing
 

Maybe Stockton Wheel? https://www.yenko.net/ubbthreads/imag...lins/dunno.gif

Re: 15 X 8 Chevy Rally Wheel backspacing
 

Thanks for the tip. Stockton wheel will do it.