The appearance of the factory firewall leaves a lot to be desired, and cleaning that up goes a long way toward making things look nice under the hood.
I smoothed the firewall and welded studs to it any place where I could to avoid having exposed fasteners.
I made a clutch master cylinder bracket and integrated that into the firewall.
The top edge I cleaned out all of the original seamsealer and trimmed each layer of sheetmetal straight, welded it solid, and formed a new front edge.
I also added a Vintage Air A/C system and hid all of the mounting and plumbing so no part of it is seen on the firewall.
|
04-11-2025, 02:10 PM
Threaded Mode