What cam would you run in a day 2 69 Z28

NorCam · #1 10-24-2019, 02:37 PM

Here is Tim's garden tractor come next summer...

**Steve Shauger** · #2 10-24-2019, 03:24 PM

I went with a Comp Cams grind selection that was based on my engine displacement, compression, and rear ratio. When done with modifications roller rockers , headers and bored 40 over, the engine put out 409hp @ 7050rpm and 373lb-ft of torque. It's a flat tappet cam. The modern dual pattern and aggressive ramp cam allow for both HP & Torque. I have the grind card and will send it to you. It has a nice lope but I could care less about the idle sound, the drivability & performance is what I care about.

**napa68** · #3 10-24-2019, 09:33 PM

Quote:

Originally Posted by norcam

here is tim's garden tractor come next summer...

lmao

The Following 3 Users Say Thank You to Steve Shauger For This Useful Post:
NorCam (10-25-2019), rlw68 (10-24-2019), Tom Hartman (10-27-2019)

The Following User Says Thank You to napa68 For This Useful Post:
Jims69z28 (10-25-2019)

Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars.