ASSEMBLY LINE CORRECT SUBFRAME BUSHINGS

**ALLZS** · #1 01-10-2016, 12:48 PM

DID OR WAY & HOW DID THE FACTORY TAPE THE BUSHINGS TO THE SUBFRAME

camaromb · #2 01-10-2016, 10:59 PM

On the original cars I've seen the tape was used to cover the body holes over the rear bushings, the bushings were not taped to the subframe.

**enio45** · #3 01-10-2016, 11:35 PM

yep what mark said

m22mike · #4 01-11-2016, 02:01 AM

Rich
As stated by Mark there was tape over the rear sub frame holes. This was placed there during a body water leak test. It is a general misconception that the bushing were taped in place.
Here is a good shot of the that tape, sticky side up. At least on Camaro.

**ALLZS** · #5 01-11-2016, 02:19 AM

THANKS FOR ALL THE INPUT THANKS FOR THE PICTURE

**Scott69Z** · #6 01-12-2016, 09:47 PM

What kind of tape was used on the floor?

Scott

m22mike · #7 01-12-2016, 10:14 PM

The ones I have had look like 2" black masking type tape.

Mike

Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars.