ASSEMBLY LINE CORRECT SUBFRAME BUSHINGS
 

DID OR WAY & HOW DID THE FACTORY TAPE THE BUSHINGS TO THE SUBFRAME

Re: ASSEMBLY LINE CORRECT SUBFRAME BUSHINGS
 

On the original cars I've seen the tape was used to cover the body holes over the rear bushings, the bushings were not taped to the subframe.

Re: ASSEMBLY LINE CORRECT SUBFRAME BUSHINGS
 

yep what mark said

Re: ASSEMBLY LINE CORRECT SUBFRAME BUSHINGS
 

Rich
As stated by Mark there was tape over the rear sub frame holes. This was placed there during a body water leak test. It is a general misconception that the bushing were taped in place.
Here is a good shot of the that tape, sticky side up. At least on Camaro.
https://www.yenko.net/ubbthreads/pics...3_img_0957.jpg

Re: ASSEMBLY LINE CORRECT SUBFRAME BUSHINGS
 

THANKS FOR ALL THE INPUT THANKS FOR THE PICTURE

Re: ASSEMBLY LINE CORRECT SUBFRAME BUSHINGS
 

What kind of tape was used on the floor?

Scott

Re: ASSEMBLY LINE CORRECT SUBFRAME BUSHINGS
 

The ones I have had look like 2" black masking type tape.

Mike