jack hold down

[Ngtflyr]

If using a space saver spare the jack and lug wrench go over the top of the space saver. This is according to page 136 of the assembly manual. On the next page it shows the normal full sized spare with the jack going under it just like Gary said.

[Ngtflyr]

Anyone know who repops the rubber straps that hold the lug wrench to the jack? Doing a space saver setup so the jack/lug wrench kinda stands out in that application. I'm not talking about the bag thing, but the two straps illustrated in the assembly manual.

[wheelhop]

I would check with Rick's First Generation Camaro. Also possibly Classic Industries and Ground Up. Also one of our sponsors D&R Camaro.

[Ngtflyr]

Been looking in the D&R or Classic catalogs, will dig up the others and see. We order most stuff from D&R since the shop has a discount there and they are easy to work with.

[Tommy_Mathison]

[ QUOTE ]
Anyone know who repops the rubber straps that hold the lug wrench to the jack? Doing a space saver setup so the jack/lug wrench kinda stands out in that application. I'm not talking about the bag thing, but the two straps illustrated in the assembly manual.

[/ QUOTE ]

http://www.heartbeatcity.com/store/p...air--67-68-69/

[Ngtflyr]

thanks

[Tommy_Mathison]

[ QUOTE ]
thanks

[/ QUOTE ]

No problem Dave.

[lzdick]

Bicycle inner tube

[William]

[ QUOTE ]
Anyone know who repops the rubber straps that hold the lug wrench to the jack? Doing a space saver setup so the jack/lug wrench kinda stands out in that application. I'm not talking about the bag thing, but the two straps illustrated in the assembly manual.

[/ QUOTE ]


Space-saver spare n/a on Z/28...

[Ngtflyr]

The space saver is on the 69 BB/RS Camaro we are doing. Funny we have considered just doing the bicycle innertube trick. Be a lot more cost effective, and this car is a driver anyway.