Help to make a dolly for a 67 Camaro shell..pics?

[iluv69s]

I was thinking of a body cart....in order to paint the shell with no obstructions..and also it is a lot less room in the garage....I hope someone can help with that

I actually had a rotisserie...

and Chuck I made the rear brackets. I started with sq tubing about 10 " long that fit over the existing two 'arms' of the rotissirie and welded stop bolts. I welded I believe 2" sq tubing perpendicular to extend under the two framerails...and then welded vertically (2) 1/4 " plates with drilled holes to simulate the shackles.... I re-installed the bushings and with bolts attached the cars like that.

It worked great...I sold the rotisserie or I would send pics...hope that helps though...