Quote:
Originally Posted by rlw68
The original paint marks on the driveshaft might remain unless its soaked too long. I'd check it after 10 hours or so. More than 24 hours will likely dissolve them away. Lots of variables and luck involved here.
These are one trick ponies. I'm not sure what to do with it now??
Attachment 175165 |
https://www.camaros.net/threads/time...4#post-1566535
Much of this seems so familiar when I documented this process over a decade ago in our build thread. 5’ long pc capped at one and two gallons will submerge your driveshaft. I had ours in 24 hrs checked it and soaked another 24 for a total 48 hrs and then documented the paint markings and there were many including the yokes both ends. If u look at the link posted scan down to the second driveshaft as the first one posted was not off our 68z. Also that link gives some other examples of how well evaporust works. Have fun!
09-30-2020, 11:51 PM
Hybrid Mode
