![]() Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
![]() |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
I am a new member to the registry, and I must say this is a very impressive site. I have a couple of questions about the Stewart Warner tachs that were used on the 69 Yenko Chevelles. What is the proper mounting position for the tach? I have seen cars that have them mounted over the steering column, and then I have seen them mounted towards the right of the dash panel. Any ideas?? Also, I have another SW Tach that I believe is a 970, but it has a 10K face rather than an 8K. Does anyone know what car this tach was applied on. Thanks to anyone with any comments.
Brian
__________________
Brian Cunningham 69 Chevelle |
#2
|
|||
|
|||
![]()
Both of my sYc Chevelles have the SW tach mounted on the dash bezel so they sit directly centered over the stg column. I know of one other car I am sure is untampered with and it too is mounted this way. Also the '69 vintage road test in one of the magazines (SSDI,I think) shows it center mounted.
|
#3
|
|||
|
|||
![]()
I agree with George and have pics of mine from back in the day with that placement...
__________________
Don't mess with old farts - age and treachery will always overcome youth and skill! Bullshit and brilliance only come with age and experience. |
#4
|
||||
|
||||
![]()
You could get a SW 970 in 6-8 or 10 grand face.They made a custom greenline face as well as a std black face tach.They were all made during this time period and were "just" another aftermarket tach........
![]() Steve |
#5
|
||||
|
||||
![]()
1969 ad.......
Steve ![]() |
#6
|
|||
|
|||
![]()
Thanks to everyone for the quick response. You guys are awesome!!
__________________
Brian Cunningham 69 Chevelle |
#7
|
||||
|
||||
![]()
[ QUOTE ]
You could get a SW 970 in 6-8 or 10 grand face.They made a custom greenline face as well as a std black face tach.They were all made during this time period and were "just" another aftermarket tach........ ![]() Steve [/ QUOTE ] Here's a couple variations of the face designs Steve mentioned. Yenko used all of these variations depending on timeframe/availability.
__________________
Joe Barr |
#8
|
||||
|
||||
![]()
Wow.....I feel the same way about the 970 series..
![]() Steve |
#9
|
|||
|
|||
![]()
Hey Joe PM me the cost of the greenline tach,I may put one in my Dart along with the greenline gauges I acquired.
Thanks Bobby |
![]() |
|
|