Used factory front coil springs off a 1969 Camaro SS

[RALLY]

I bought a pair of front used coil springs off a 69 Camaro SS 350 SB Engine Suspension. This is what i was told by the seller. There are no spring sticker ID's on them. I measured the coil wire dia which are .640 thous dia. Measure free height on springs, which look like 16.50 inches long. Doing my research on these front coil springs the .640 wire dia is a heavy duty coil spring dia used on the F41 suspensions. These springs according to Chevy books most likely were used on the 69 Z-28 Camaro's 302 Cubic Inch and the 396 Cubic Inch 69 SS Camaro's. Front coil springs were used by Chevy determining the front end weight of those cars. Example Cowl induction hoods, heavy duty radiators, etc based on those weights. The person i bought these from told me these were removed from a 69 Camaro SS 350 SB Engine Suspension. These coil springs were not cut according to past seller. I never got around to using these. I will sell the pair for 100.00 dollars plus 40.00 dollars shipping. If interested send me a message with your email address and i will send some pictures if you would like.