2nd Gen Camaro Springs

[BARN FIND]

I took the subframe apart to clean and paint that I am going to use on my 72 Camaro and the front springs still have the tags on them, they are marked : DN with 6262430 bellow and are yellow, does anyone know if these are BB or SB springs and if they are for small block are they for with or without air?

[Mr70]

Those were originally intended for the 454 LS-4 equipped 1973 Chevelle & Elcamino with a ft. end weight between 1042-1123lbs.,but not if the Super Sport package was also ordered on them.

[BARN FIND]

OKAY, they were in a 1970 Camaro subframe, is there a application for Camaro listed, I do not think it has ever been apart before today...

[Mr70]

We know the factory made occasional errors,but the fact that those DN coded #6262430 springs are such a later/higher number then anything used during 1970-72,leads me to believe someone installed them years later after the factory initially released that particular vehicle..

<u>1970 Camaro Ft. Spring chart:</u>
350cid w/o AC #3982340
350cid w/AC #3982351
402cid L-34 &amp; L-78 w/o AC #3982342
402cid L-34 W/AC #3982353
350cid/360HP LT-1 #3982342

[BARN FIND]

Well I took the info you gave me and cross referenced it thru the Eaton Detroit Spring part number for a 73 454 Chevelle and it is equivalent to an 71/72 396 Camaro spring or oddly enough a 77 and later Camaro 250ci straight six with air. So I guess it has been apart before. Thanks for the info!