Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
|||||||
| Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
|
|
|
Thread Tools | Display Modes |
|
|
|
#1
01-03-2009, 05:47 AM
|
||||
|
||||
Re: Aluminum finishing/anodizing
George,
Do you offer re-anodizing services for aluminum trim or do you just remove the original anodizing and then polish the piece? 
|
|
#2
01-03-2009, 07:15 AM
|
|||
|
|||
|
Re: Aluminum finishing/anodizing
George polished the aluminum moldings that go around the top of the doors. A couple of them were scratched pretty bad. He did a real nice job. All the scratches are gone, and they shine like new. I removed the anodizing, but he will do it if you need it done. He does not re-anodize, but when I saw the moldings polished, I couldn't think of a good reason to anodize them anyway. They look perfect. A quick hand polish a couple time each season, should be all they need. What George doesn't know (until he reads this), is that I screwed up one of the moldings putting it on the door. I have another one that will fit better, but it's got to be polished like the others.
|
|
#9
01-05-2009, 08:12 PM
|
|||
|
|||
|
Re: Aluminum finishing/anodizing
Mark, recently did all of the stainless trim for my LS6. It is the best that I have ever seen. Not only does he do quality work but his customer service is outstanding. Besides that he is a true car guy that gets it, (forgive him for his Mopar roots).
Don
__________________
Don Stowers 66 GTO, Tri power, Fact. A/C, 4 speed 65 Corvette, L-76, Conv., Fact. A/C 63 Corvette SWC
|
|
#10
01-26-2009, 05:24 AM
|
|||
|
|||
|
Re: Aluminum finishing/anodizing
here's a few pics of my work.Hope you like it.Sorry i don't anodize.I just turn junk into nice.I've been doing aluminum and stainless restoration for 20 yrs.Belive me i'm not shooting my mouth off or anything like that.I feel i still have alot to learn and i'm always striving for perfection.
 All tigged up.  2 1/2 hrs of hand sanding to the contour back.  the final finish.3hr job happy customer.  My latest job.66 Fairlane grille.  grille valence mldgs polished and painted.  grille masked up for paint   finished grille on display with some other stuff at the Allentown Pa show last weekend.The first time i displayed my work to the public and alot of positive feedback. www.glmetalpolishing.com
|
|
|
|
Hybrid Mode
