69 Chevelle hood hinges

[VintageMusclecar]

Mike;

That would be awesome, please give me a shout if/when you come up with anything.

Thank you.

Eric

[Mr70]

Chevrolet denotes that some hood hinges will interchange on other vehicles,but note that elongating the rearward hole on some by up to an inch may be necessary.Use under own discretion..
Here's what they originally used on the assembly line.
LH#3910667 & RH #3910668 hood hinges were installed on:
*1967-69 Camaro
*1966-67 Chevy II
*1965-67 Chevelle
*1965-67 Impala series

1968-76 Nova hood hinges were the same ones used on the 1968 Chevelle & Impala series.
As was stated earlier,LH #3949201 & RH #3949202 were 1969 Chevelle/Impala specific.

These all include Station Wagon/Elcamino,2 door or 4 door and be they SS or not.

[bigchevydaddy]

Eric,

If you come up empty on the '67 Chevelle hood hinge search, I probably have an extra set of '65-66 Impala hinges you could use according to the above listing.

Good Luck,

BCD.

[VintageMusclecar]

Rick, your knowledge of part #'s never ceases to amaze me.

BCD;

Thank you, I'll post up here as soon as I know anything.

Eric

[Mr70]

The springs that a hood hinge is holding are what mattered,so be sure you check into which one they have as well.To answer a few emails,here are just two pertaining to Erics' own vehicle..
Spring #3848272 is 8-25/64" long free sitting with 27-3/4 coils used on:
*1963-64 Chevy II
*1963-65 Chevelle
*1964-66 Impala series
*1966-67 Chevelle w/SuperSport
*1967-69 Camaro w/350cid or 396cid.
*1970 Impala series
*1971-72 Monte Carlo inc.Elcamino Custom
*1970-72 Chevelle w/Supersport or HeavyChevy pckg.

Spring #3864680 is 8-13/32" long free sitting with 24 coils used on:
*1965 Chevy II
*1966-67 Chevelle w/o SuperSport
*1968 Chevelle 2nd design
*1968 Impala series
*1969-72 Chevelle w/o SuperSport or HeavyChevy pckg.

I show many dealers around the country still holding inventory on both of these springs,so if anyone needs them let me know.