Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
|
|
#1
05-29-2008, 09:24 PM
|
||||
|
||||
Re: leaf spring clamps
I've been running a set of DH clamps on my 68 for a few years now. I use them with the Lakewood bars..What a difference.The car hooks harder and goes straighter...
 Steve 
|
|
#2
06-04-2008, 05:16 AM
|
|||
|
|||
|
Re: leaf spring clamps
The clamps will be going on shortly, noticed the front end of the leafs are a bit "tweaked" already, going with the DH method. Anybody use an aftermarket pinion/front of diff. snubber,? seems the factory one ain't cuttin it and some marks are being on left on the floor pan above the rear U joint. Thanks for the tips/pics. SULLY
__________________
70 L78 Nova Fathom Blue,Bench, 4spd, F41, 3:55 71 Porsche 911 Targa
|
|
#3
06-04-2008, 07:26 AM
|
||||
|
||||
|
Re: leaf spring clamps
Maybe if you took your right foot out of the "water pump" you wouldn't damage so much hardware
 ...by the way, when are you installing the wheely bars...???  luv, wilma
__________________
02 Berger 380hp #95 Lots of L78 Novas Join National Nostalgic Nova! 70 Orange Cooler 69 Camaro
|
|
#4
06-04-2008, 04:35 PM
|
|||
|
|||
|
Re: leaf spring clamps
The car has 2 speeds, off and floored, parts be damned
__________________
70 L78 Nova Fathom Blue,Bench, 4spd, F41, 3:55 71 Porsche 911 Targa
|
|
#5
06-04-2008, 05:24 PM
|
||||
|
||||
|
Re: leaf spring clamps
The spring clamps will help with the shaft to floorboard issue. On one of my first runs down the strip, I noticed that the car was 'settling' at the big end - enough for the shaft to just lightly rub the floor board. Stronger springs, some clamps, some wedges, or a snubber would all work.
__________________
Marlin 70 Yenko Nova-350/360, 4speed M21, 4.10 Posi (Daddy's Ride) 69 SS Nova-396/375hp, 4speed M20, 3.55 Posi (Benjamin's Ride) 67 RS Camaro-327/250hp, 2speed Glide, & 3.08 Open (Danny's Ride)
|
|
#6
06-04-2008, 07:38 PM
|
|||
|
|||
|
Re: leaf spring clamps
Like M said, the clamps should help subdue axle wrapup, and keep the floor safe...if the front portion of the leafs can't bend/seperate, then the axle itself can't move...unless it moves within the u-bolts!
|
|
#7
06-04-2008, 08:29 PM
|
|||
|
|||
|
Re: leaf spring clamps
Ordered the clamps and will have my local steel guy fashion me up some DH plates, anybody running a different snubber, something that would not "allow" the diff/d.shaft to travel up to the floorboards.? Thanks again for the help
__________________
70 L78 Nova Fathom Blue,Bench, 4spd, F41, 3:55 71 Porsche 911 Targa
|
 |
|
|
Hybrid Mode
