1970 Chevelle Bucket Seat Medallions?

[DarrenX33]

Where's professor70?

[Postsedan]

Darren,

Perhaps you can go into the Bat Garage and instruct Alfred to turn on the "Mr70" Search Light.

Dan.

[DarrenX33]

Can't. My privileges have been taken away. I already have said too much. The moderators have probably been contacted already. I expect my PM box to be full shortly. Good luck.

[Rixls6]

Front seat medallion is approx. 6" down from upper bead as in pic. I butted the end of the tape measure to the upper bead for this pic.
The rear is approx. 10" down from the rear edge of seat top. I hooked the tape measure on the edge for the pic.

[Postsedan]

Darren,

You have a PM.

Dan.

[Postsedan]

Rick,

What speedy service.....Thanks so much. Photo`s are great!

Have these seats been recovered at some point? Or are they original?

Oh Mr. Cumby.....I need you.

Dan.

[Rixls6]

Dan,
The front seats were recovered, but I transferred the medallions to the same spot they came from.
The rear seat is original.

[Postsedan]

Rick,

I really appreciate your help.

You are also very handy with the camera....you almost need 3 hands to pull that off.

Dan.

[ORIGLS6]

[ QUOTE ]
Rick,

What speedy service.....Thanks so much. Photo`s are great!

Have these seats been recovered at some point? Or are they original?

Oh Mr. Cumby.....I need you.

Dan.

[/ QUOTE ]

Sorry Dan, the squirrel froze to the treadmill and we just got him warmed up.

Maybe I measured from a different spot than Rick but here's what I got for the rear seat. Can't be much help with front buckets; I chose the cheap seats!

Straight on shot.



Measuring from here...........



we get..............

[Rixls6]

Well I guess GM varied in their placement of the medallions. I measured from the same place you did Dennis, and this for sure is the original back seat.
Wonder if anyone else has another measurement for their back seat medallions?