Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
|||||||
| Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
|
|
|
Thread Tools | Display Modes |
|
|
|
#1
11-09-2007, 10:10 PM
|
|||
|
|||
Re: '68 Camaro A/MP race car
If the tires are lit, he's got no bite.
 I think it's smoke from the right header,....................maybe dust, but I'm thinkin smoke.  or tranny fluid. 
__________________
Don't mistake education for intelligence. I worked with educated people. I socialize with intelligent people. 
|
|
#2
11-09-2007, 10:53 PM
|
||||
|
||||
|
Re: '68 Camaro A/MP race car
[ QUOTE ]
If the tires are lit, he's got no bite. I think it's smoke from the right header,....................maybe dust, but I'm thinkin smoke. or tranny fluid. [/ QUOTE ] Smoke's in front of the tires so it's probably a huge open-header exhaust belch emitted when the gas pedal was mashed to the floor.
|
|
#4
11-09-2007, 11:14 PM
|
||||
|
||||
|
Re: '68 Camaro A/MP race car
Here is the definitive answer to that question - direct from Marty!
-  - - Hi Glen: I hope this settles the nonsense I've seen around this photo. Since I took the photo I know it's real. He made just a couple of passes and I nailed the shot. Somehow the shot on the Yenko website and what you have sent looks as though it may have been retouched. I'm not sure if there was that much daylight under the wheels when I took it. However, the wheels were up. It's the real deal. It was shot during actual dyno testing, not so I could get a shot pulling the wheels. It was shot on a Saturday and the car was being readied for the track on Sunday. Hope this helps, Marty
__________________
|
|
#5
11-09-2007, 11:37 PM
|
|||
|
|||
|
Re: '68 Camaro A/MP race car
If you look under the car you can see what appears to be a header collector and distortion in the picture which is probably heat/smoke
|
|
#7
11-10-2007, 12:49 AM
|
||||
|
||||
|
Re: '68 Camaro A/MP race car
Kim
Same car - If you look closely you can see the lettering on the pass fender. Those other shots with the Motion hood were taken at a later time.
__________________
|
|
#10
11-10-2007, 12:02 AM
|
||||
|
||||
|
wheeliegate
""Sorry I am in the "Im again it club" "" VW's stock forty HP easily modified with over the counter parts from Motion (minicar) to 100hp would easily get 4inches of air on both sides with pro trac 60's on a stock rear. BTDT
|
|
|
|
Hybrid Mode
