Go Back   The Supercar Registry > General Discussion > Lounge


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #6  
Old 10-24-2007, 06:46 AM
GREEN4SPDSS GREEN4SPDSS is offline
Junior Member
 
Join Date: Oct 2007
Location: Home of the Camaro kid
Posts: 17
Thanks: 0
Thanked 0 Times in 0 Posts
Default Re: 512 long block question

Thanks ...........Very Interesting I thought there should be something there atleast. Well I assume it must have been Decked then Sometime In It's life. Well Here's the Deal I came Across A 512 Long block complete with 842 heads. It's been sitting for over thirty years. I removed the spark plugs and it turned over with out a problem. I removed the oil pan and it looked good you can still see the paint marks on the dimple rods It has had rods replaced because I see the oil pan has been welded on the inside. And the heat mark on the crank journal. The Rods look new to me. I assume it was repaired and run again then stored. I was told the engine was in a 57 chevy running a crower Mechanical fuel Injection Set up. The Manifold and line's come with the Engine The only thing missing is the Fuel pump. It has a clutch on it.(borg and Beck style) Also a old ANSEN Scattershield. With NHRA certified Cast in it. Top it all off M/T valve covers. What do you think It's worth I feel It is a L-88. Do the pad numbers being gone kill the value bad? Ed
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 01:44 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.

O Garage vBulletin Plugins by Drive Thru Online, Inc.