![]() Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
The high capacity vans have a terrible rollover rate so try and keep it to 11 passaenger capacity and under. Some other issues to consider are storage to keep vandalism down. "You" may also become the church van mechanic. Whoever drives it may need a chauffers liscense. Many chuches struggle with this issue and after owning a van end up using car pools to solve these issues. No easy answer!
__________________
Howard Growing old is a certainty, growing up isn't |
#2
|
|||
|
|||
![]()
I sell used Fords and GM's and I would recommend a Ford for heavy duty use. The interior on the GM is too fragile.I'm basing this on what my customers are telling me.Try to find a four/five year old high mileage unit with a gas engine that looks like it had maintenance.
|
#3
|
|||
|
|||
![]()
One of my customers had a small bus built on an E450, it was a little bigger than a passenger van, but more stable. It also had lower entry and easier access to seats, better for the elderly. Check with a local bus company, they usually get them in on trade from people upgrading. If you go with a Ford chassis, bus or van, check the brakes and front end real good. They are known for fast brake wear and ball joints. This is not a bad thing, you just don't want to spend all your money buying one and then spend more money on repairs. Hope this helps.
|
![]() |
|
|