Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
|||||||
| Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
|
|
|
Thread Tools | Display Modes |
|
|
|
#1
|
||||
|
||||
|
That shifter handle was originally used on a Bucketseat /Manual Trans./NO CONSOLE Super Sport Chevelle/Elco in 1970,and also ALL 1971-72 SS 350 Chevelle/Elco.
I think a Bucketseat/Manual Trans./NO CONSOLE Big Block 71 Super Sport Chevelle/Elco could have come with it too. I believe bucket seat/consoled equipped used the #865 handle,and bench seat used #866. |
|
#2
|
||||
|
||||
|
The #867 is what they used in the 70 Chevelle with bucket seats with or without console.
|
|
#3
|
|||
|
|||
|
I agree with Rick We discussed this before.
PJ |
|
#4
|
||||
|
||||
|
I think Rick Cell is right,there were only two designs used.Looking at a few local equipped Chevelles,as well as parts books,here is what I believe they did.
Regardless of engine,the 3 & 4-speed 1968-72 Bucket seat console AND NO Console equipped Chevelle/Elco/MonteC used Muncie shifter #3973867 which is stamped on the shifter foot itself,but Chevrolet parts books see this as shifter #3973866...(GM has history of doing this with parts in the past.Like the 1970 Malibu Tail Lenses,Flywheels and Ignition Coils.The actual manufacturered part itself will show a one digit difference,be it up or down,from what GM parts books & boxes actually callout for.)...The 1970-72 3 & 4-speed equipped,(1968-69 were different),Chevelle/Elco/MonteC Bench seat applications used Muncie #3973864,which is stamped on the shifter foot,yet the parts books call out for #3973865.This is also compared and noted in the AIM. Why some shifters say MUNCIE along with a part #,and others are void of one or both,is a good question.Could they be over the counter issued,Saginaw only or later service parts? |
|
#5
|
|||
|
|||
|
I believe Muncie one say Muncie while Saginaw ones do not have the stamping.
Jason |
|
#6
|
||||
|
||||
|
Rick,
Do you have the Nova part numbers and applications?
__________________
Marlin 70 Yenko Nova-350/360, 4speed M21, 4.10 Posi (Daddy's Ride) 69 SS Nova-396/375hp, 4speed M20, 3.55 Posi (Benjamin's Ride) 67 RS Camaro-327/250hp, 2speed Glide, & 3.08 Open (Danny's Ride) |
|
#7
|
||||
|
||||
|
Muncie shifter #3920248 used on:
*1968-70 Chevy II 3 Spd.Heavy Duty & w/o Floor console. *1971-72 Nova 3 Spd w/floor shift. -------- *1968 Chevy II w/4 Spd & Floor shift. *1969-70 Nova 4 Spd,but NO Floor console. *1971-72 Nova 4 Spd. Muncie shifter #3934288 used on: *1967-68 Camaro 3 Spd.w/floor shift. *1968 Chevy II 3 Spd. w/floor console. *1969-71 Nova 3 Spd. w/floor console. *1969 Camaro 3 Spd. Heavy duty. -------- *1967-68 Camaro 4 Spd.w/floor shift. *1969-70 Nova 4 Spd. w/floor console. |
|
#8
|
||||
|
||||
|
Thanks!
![]()
__________________
Marlin 70 Yenko Nova-350/360, 4speed M21, 4.10 Posi (Daddy's Ride) 69 SS Nova-396/375hp, 4speed M20, 3.55 Posi (Benjamin's Ride) 67 RS Camaro-327/250hp, 2speed Glide, & 3.08 Open (Danny's Ride) |
![]() |
|
|