Long Neglected Camaro Soon To Get Better

**Bill Pritchard** · #1 03-05-2007, 07:07 AM

Right cyl head....the second picture shows a code totally different in appearance and format than the left cyl head

**Bill Pritchard** · #2 03-05-2007, 07:11 AM

Rear axle.....BV code is 4.10 posi

4/22 axle assembly date to go along with the 04D build date on the Trim Tag

**Bill Pritchard** · #3 03-05-2007, 07:13 AM

Trans tag

**Bill Pritchard** · #4 03-05-2007, 07:15 AM

Trans stamps. CON VIN matches the car's VIN....4/16 trans assembly date for the 04D Trim Tag

**Bill Pritchard** · #5 03-05-2007, 07:17 AM

tag from RF spring

**Bill Pritchard** · #6 03-05-2007, 07:19 AM

Tail panel is definitely NOT gloss black. You can see the line where it was masked off from the body color on the rear valance.

**Bill Pritchard** · #7 03-05-2007, 07:22 AM

The Hurst Super Shifter is hard to beat, but it sure wreaks havoc with the trans tunnel

**SuperNovaSS** · #8 03-05-2007, 07:13 AM

The date codes are on the underside of the intake runners. They can only be seen with the intake off.

Jason

**Bill Pritchard** · #9 03-05-2007, 07:28 AM

[ QUOTE ]
The date codes are on the underside of the intake runners. They can only be seen with the intake off.

Jason

[/ QUOTE ]

Excellent, thank you, Jason

Will check those as the engine is disassembled.

MARK B · #10 03-05-2007, 07:42 AM

hey bill,

i was just looking through this post and guess what
my 68 is a 04d built car also with my vin 421XXX

so i did the math and my 68 is 1888 in front of your
friends.

my camaro was a island teal with a black vinyl top
and black standard interior.

small block with a 3 or 4 speed w/o a console

my trans tunnel was hacked also for the hurst super shifter too.

small world huh

thanks for your time
mark b

Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars.