Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
|||||||
| Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
|
|
|
Thread Tools | Display Modes |
|
|
|
#1
|
||||
|
||||
|
That sucks... if a 15x7 4.75 bolt pattern torq thrust won't fit a 69 Camaro, they made a huger error in the specs for these wheels, as i would bet that a very large percentage of people buying these wheels will want to use them on 69 Camaros. I had the "other" new TT's (rounded spoke versions) on my camaro in a 15x6 and had no clearance problems... backspacing was identical to the stock rally wheels... I know thats also true of the 15x7's... don't know why they'd make the TTO's with a different backspacing. Wheel spacers suck though, maybe modify the calipers a bit? are they hitting the caliper or just the caliper brackets? I had a vintage set that rubbed the brackets once, but they were 14"s... IMO, I'd put those suckers on ebay and go find a "real" old school set of em...
__________________
Joe Barr |
|
#2
|
||||
|
||||
|
No problem with the TTO's on the Black RS/Z...
![]()
__________________
~JAG~ NCRS#65120 68 GTO HO 4 spd Alpine Blue /Parchment 2 owner car #21783 71 Corvette LT1 45k miles Orig paint - Brandshatch Green - National Top Flight - last known 71 LT1 built. 71 Corvette LT1 42k miles Original paint - Black - black leather - only black LT1 known to exist. NUMEROUS Lemans blue Camaros, Monza Red and Daytona Yellow Corvettes & a Chevelle or two... Survivors, restored cars, & other photos https://picasaweb.google.com/lh/myphotos |
|
#3
|
|||
|
|||
|
15x7 TTO's fit my 69 just fine, too.
|
|
#4
|
|||
|
|||
|
I think the problem with this particular car is that it has 68 style calipers on it, not the smaller 69 calipers. See this: https://www.yenko.net/ubbthreads/show.../page/0#212370
|
|
#5
|
||||
|
||||
|
TTO's on my 69 Yenko fit just fine.
__________________
Steve Shauger The Supercar Registry www.yenko.net Vintage Certification™ , Providing Recognition to Unrestored Muscle Cars. Website: www.vintagecertification.com |
|
#7
|
|||
|
|||
|
The wheels will not clear a four piston caliper. I had the same problem on my 69 with JL8 front calipers. I had to use longer wheel studs and a small spacer. A little bit of agravation to find correct length wheel studs but worked out.
|
![]() |
|
|