What paint to use for Restoration??

[DarrenX33]

I did not have my car judged this time around but heard that Vettefest judges were taking points off for BC/CC...

[Mr70]

Bring back Al Fierke...

[DarrenX33]

Al was there....

[hvychev]

My Deuce is painted in Laquer and I hate it. It is a lot more maintience than regular BC/CC paint since I drive my car. The only thing that is good about it is it is a lot easier to touch up or "repair" the paint should you ever have a mishap. I bumped the back of my Deuce while parking it over a year ago cracking some paint off the car. Luckily I still had some of the original DuPont Laquer that the previous owner painted my car with. I brought it to the right guy and he fixed it so well that I can't even remember where I bumped it!

[MosportGreen66]

In the NCRS a major deduction in paint scoring occurs if the car is painted in BC/CC; even if you have made an honest attempt to dull BC/CC (appear as if it were lacquer). The door jambs, head light buckets and rear valance should all be lack luster areas (among others). Virtually every car that makes it to the highest of possible levels in scoring and showcasing (high point Top Flights and special collection cars) all have original lacquer paint. It is far more superior for the stickler restoration. Commonly you will find the Corvette owners who paint their cars in lacquer will bring covers to shows and park their cars in those plastic climate controlled bubbles. When dealing with Corvettes, your car has got to be 100% dead on perfect to win high prestigious awards with BC/CC. It is very costly and very hard to find a guy who will paint using lacquer today. The paint contents are known carcinogens.

[Enoch]

I am currently doing frame off's on 3 67 435 corvette convertable's and 2 are going lacquer and one going single stage red. The lacquer paint is not as hazardous as the newer paints with Isocynates. I will not give a guarantee
on lacquer. As the paint manufactures do the same.

[Hotrodpaul]

I find that Lacquer is very easy to work work with if you know the product. The main problem I find is thinning it the proper amount with the correct thinner to get that flow out just right and setting the gun flow properly. In Houston with the high humidity, the paint was frosting up due to condensation so I ended up using a retarding type thinner to slow the drying time, and it worked, giving that factory type finish. Due to the high VOC's, it has been outlawed since the late 90's but still can be had if you know where to get it. I have tried enamel based paints and the look just does not match my original paint Lemans Blue 69 SS.

Paul

[Supercar_Kid]

[ QUOTE ]
I brought it to the right guy and he fixed it so well that I can't even remember where I bumped it!

[/ QUOTE ] Frankie, was the repair really that unnoticeable or were you just sniffing the leftover can of lacquer?

[hvychev]

No kid, I leave the huffing paint up to other people!