![]() Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
Now I'm thinking slate may be the way to go. If not, the Lowe's rustoleum has a step where you can seal the floor against moisture. Not sure how that would work or how the epoxy would stick to it.
On a good note, my builder has done the rest of the terrace level in dark slate and he gets a great deal on the stuff. I wonder if there is a non-slippery when wet slate?? |
#2
|
|||
|
|||
![]()
When I build my garage in a couple years one thing I am going to look into is lights built into the floor so I can see what the #@$% I'm doing without dragging lights around. I know they exist, haven't done the research yet though on whats the best out there.
__________________
Dave ![]() |
#3
|
||||
|
||||
![]()
Ok, here is some POR-15 info. You can either scuff/sand the floor or acid etch (muratic acid) it. Make sure your rinse it real well and it is completely dry. POR-15 even makes a marine prep cleaner (apparently recommended for concrete surfaces) that should produce the same or better results. Now for doing an average 3 car garage my brother-in-law used 2 one gallon cans with some to spare. Good for 2 coats. He used 2 throw away paint rollers. Obviously the better quality roller the better it will turn out. Then paint brush the corners. POR-15 is UV sensitive on its own. I was told after a day or two with the garage open the finish sitting in the sun lightened up. If this bothers you they make a clear that the UV won't bother.
__________________
1969 Z28 1972 Corvette |
#4
|
|||
|
|||
![]()
This is good info but confusing. I know POR-15 is some of the toughest stuff in the world. Maybe clear would be the way to go. Wonder if it yellow? Could you use it as a top coat sealer? Or would it provide a great waterproof base?
|
#5
|
|||
|
|||
![]()
Make sure you dress properly, cant get POR-15 off your skin very easy, Im looking at stains with a clear coat. I coated my floors with a sealer when I built the garage 10 years ago so Im going to acid wash them 1st. If you use stain you have a huge color choice, Hugger Orange with white stripes?..I have my sales reps checking into all of this.
__________________
SamLBInj 69 Z/28 X33D80 72-B H-D 105 FLSTC |
#6
|
|||
|
|||
![]()
__________________
SamLBInj 69 Z/28 X33D80 72-B H-D 105 FLSTC |
#7
|
|||
|
|||
![]()
That Ames Super Primer should have a lot of uses. I'm building a safe on that level too and if that stuff does what it says it would work perfectly to keep the room dry. With or without a color coat.
|
#8
|
|||
|
|||
![]()
Here is my floor coating coming off today.
|
![]() |
|
|