Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
|||||||
| Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
|
|
|
Thread Tools | Display Modes |
|
|
|
#1
07-11-2005, 05:52 PM
|
|||
|
|||
Re: Groove in rear cam bearing on 66-67 396 engine
Thanks, I think he was hoping it was no big deal, but this is a no excuse car, so apart it'll come. Appreciate the quick response and especially the pics and explanation.
__________________
1966 442- L69 4 speed 1968 Ramrod W31- bought new 1968 442 W30-real thing,but a little different 1975 Delta Royale convertible- 
|
|
#3
07-11-2005, 07:31 PM
|
|||
|
|||
|
Re: Groove in rear cam bearing on 66-67 396 engine
Been in that same boat before...put it all together, and was priming the oil system, but one side never would take...got the specs for the groove, and Mo ended up putting the cam on a lathe...
|
|
#4
07-11-2005, 07:54 PM
|
|||
|
|||
|
Re: Groove in rear cam bearing on 66-67 396 engine
I did it with a hand held grinder worked fine. I was 20 at the time. You never forget mistakes.
__________________
Jake is my grandson!!
|
|
#5
07-13-2005, 05:40 PM
|
|||
|
|||
|
Re: Groove in rear cam bearing on 66-67 396 engine
He started taking it back apart yesterday. Sad after being down to a body and rolling chassis for 2 years and all that was left was the seats and door panels.
Good advice, though. Thanks again.
__________________
1966 442- L69 4 speed 1968 Ramrod W31- bought new 1968 442 W30-real thing,but a little different 1975 Delta Royale convertible-
|
|
|
|
Hybrid Mode
