Original Ignition Lock visor sleeve for 69

[budnate]

Scott is that a visor model??? what does the front look like???

[Salvatore]

That is a visor model. I have that version. Bud, yours is different. It looks neat with the arrow.

[budnate]

[ QUOTE ]
That is a visor model. I have that version. Bud, yours is different. It looks neat with the arrow.

[/ QUOTE ]

no kidding??? I assumed they would all be the same until Scott posted,how does yours display?? does it have two sides of information??? hey Rick what does yours look like??? is the one I had a fricken hen tooth....

hey Mark when you get back from crop dusting and check in..sorry for stealing your thread but this is pretty interesting stuff, have you seen the different versions???

Bud.

[SS427]

Bud,
Mine looks like Scott's. I would say you have that hen's tooth!

[Belair62]

Bud I'm holding the box hostage until that sleeve comes !

[budnate]

[ QUOTE ]
Bud I'm holding the box hostage until that sleeve comes !

[/ QUOTE ]

!@#$% #@*&& ^%$#!!!...ok, but the armed guard coming with it is on your nickle

[737Driver]

This is a rough crowd

On the sleeve I'm selling, I'm not even sure of the application other than Camaro. It is for a 'large visor' (such as Camaro) as opposed to a 'small visor' (such as the Corvette). You can tell the difference by the part # as well as the margin space from the fold to where the lettering begins.

What I know (very little) pertains to the Vette. Initially, at the beginning of the model year, there was a decal used to warn the owner not to manipulate the shift bowl or damage could result. This decal had two designs, was placed on the jacket forward of the steering wheel (orientation dependant on whether the car had tilt/tele or not) and was used until approximately early to middle summer of 69.

The original design visor sleeve (7/68), such as the one pictured above, where the arrow is displayed on one side, is the 'first edition' and was very short lived. For the Vette folks, these are extremely rare. It was used, typically, with the column decal until the second design visor sleeve (10/68) appeared. At that point, it is not uncommon to find both the sleeve and decal, just the decal or just the visor sleeve displayed. NCRS has determined this by observing original cars. At some point during the summer, the decal was dropped and only the visor sleeve appeared.

I believe that both of these sleeves as well as the second design column decal is being reproduced.

Now, one of you cheapskates needs to purchase my part

Regards,

Mark Donnally

[Mr70]

Yep..Marks right.
That was their application/time period,but it was available on ALL new GM Cars when the Column mounted Ignition switch started on the 1969 models....with Red locating dab in detent.
Jim Osborn Inc.has been reproducing both designs:
*DC0760 early 1969 dated 7/9/68 Ign. Start Sleeve 7" long #3961387-$3.50

*DC0721 1969-71 dated 10/2/68 Ign. Start Sleeve 6" long #3964573-$3.50

[scott s]

Yes its a visor model the other side looks the same with the "big key pic"..

[Tommy_Mathison]

i am looking for one of these for my 69 z/28, im looking for one in that would be in pretty nice shape. if anyone can help, PM me thanks!