Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
|||||||
| Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
|
|
|
Thread Tools | Display Modes |
|
#1
01-22-2005, 10:11 AM
|
||||
|
||||
distributor questions....
COPO and ZL1 cars, were any delivered or ordered with the 1111927 distributor? Was curious if the distributor was the same as the Corvette issued one or were they different? I found a 343 amplifier and wondered if the Camaro amplifier unit differed from the Corvette amplifier? Was the amplifier's existing wireloom different, other than the wiring harness from the distributor to the rubber plug on the end of the harness attatched from the amplifier...? What is the relationship of this distributor vs. the 1111263 unit? I have heard of those ball bearing units too. Any thoughts are appreciated! Thanx!
__________________
Chavez Ravine 
|
|
#2
01-22-2005, 08:41 PM
|
||||
|
||||
|
Re: distributor questions....
This CRG report tells the story.
http://www.camaros.org/trans_ign.shtml Lots of part #'s for when you search e-bay.
__________________
...................... John Brown This isn't rocket surgery.....
|
|
#5
03-09-2005, 04:43 AM
|
||||
|
||||
|
Re: distributor questions....
On this 207 coil, is this the suggested original coil to be used on our 1969 Camaro's with the TI, or was the production coil a different embossed and part number'd coil?
Thoughts and correct answers???
__________________
Chavez Ravine
|
|
|
|
Linear Mode
