WANTED 350 Motor

[dw69z]

One of the main components missing to complete the restoration of my 1970 Yenko Nova is a 350 4 bolt 010 motor. The motor must be dated between March and July (CTB). I also need the pulleys, crank and water pump too. Please let me know if you may possibly have one along with the cost.
Thanks,
Dennis

[YENKO DEUCE REGISTRY]

Let me revise your spec's a little! (July is too late)

The ideal block should have a cast date between mid-may and the 2nd week of June, and should have an assy date of the 2nd week of June. However, a block with a cast date as early as March with an assy date post-March would suffice. No 1980 blocks with the small pad!

The water pump is a #692 and can be found somewhat easily by going to the local junkyard, as they came on thousands of small blocks. The best yard? Geeses Auto Salvage in Perkasie, although I hear they now charge a $2 cover charge to offset insurance costs.

If you need a crank and rods, it's probably best that you buy them new, directly from GM via the Performance Parts catalog. It's difficult to buy that stuff used and feel comfortable that it's not hurt.

[dw69z]

Thanks for the extra info Marlin - we greatly appreciate all of your efforts in helping us with this.

[YENKO DEUCE REGISTRY]

Here's your alternator pulley, this is the current version available from GM (note the AC Delco wrapper!), and therefore may differ a little compared to the original ones in it's texture. You might even take the part number from this auction and call the local Chevy dealer to find out if you can buy it cheaper than the $60 buy it now price.

http://cgi.ebay.com/ebaymotors/ws/eB...tem=2489804537

[Mr70]

I'm showing 8 dealers selling that exact same Pulley,shown on Ebay today,for $49.30,or less.
In Pa.,try Fred Bean Chevrolet-877-942-3267.

*Alt.Pulley #3829387 is a 3&5/8 Outer Dia.,and 43/64 shaft Dia.
*Alt.Pulley #1970831(I think this is the REAL Pulley for your application)is a 3&3/16 Outer Dia.,and 11/16 shaft Dia.

[Rodbbc]

Have a fresh 70 LT-1 short block dated for F-70 came from my 70 Z28 contact [email protected] Thanks

[YENKO DEUCE REGISTRY]

F-??-70

Can you tell us the actual day? It's important for a Deuce engine.