Factory Original 1970 Chevelle SEAT INSERTS

[camarojoe]

I don't question that there is a difference in the embossing and overall texture and look of an original seatcover insert vs. a repro seatocover. My question was, is a repro seatcover, particularly a colored (non-black) one an exact match to the factory colored material, or is there a mismatch in color between the restof the repro cover and the original insert? Are black inserts avaialable?

[MrMotion]

There should be no color difference. I have three pictures I tried to post but need to be reduced because they are too large. If someone could re-edit the size I will send them so that they can be posted and then you will see that they are the same color.

Tony

[Belair62]

You can send them to me Tony

[MrMotion]

I have sent you three pictures of the seats.

Tony

[MrMotion]

You have e-mail, Bob.

Tony

[Belair62]

Here are the pics from MrMotion......

[P.J.]

Please ignore the date on the pics a s I did not change the date when the pics were taken. You can see the background
of the door pannels and the back seat it is an identical match pics taken today.
suprss70

suprss70

[MrMotion]

SEAT INSERT MEASUREMENTS for both Bench seat and Bucket seat 1970 Chevelle:

RED BUCKET SEAT INSERT (FRONT UPPER) 26 5/8" length
14 1/4" width

(FRONT LOWER) 20 3/4" length
13 7/8" width

RED BUCKET SEAT INSERT (REAR UPPER) 29 3/4" length
18 3/8" width

(REAR LOWER) 20 1/2" length
20 7/8" width

RED BENCH SEAT INSERT (FRONT UPPER) 25" Length
20 1/4" width

(FRONT LOWER) 20 1/2" Length
20 3/4" width

RED BENCH SEAT INSERT (REAR UPPER) 29 3/4" Length
18 1/2" width