Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
|
|
#1
|
|||
|
|||
|
Hi All
The Chevelle COPO 9566aa of my friend Stephane have a 8 stamped in the firewall tag on the bottom left corner of the tag.And a 18 in the top right corner of the tag. This COPO 9566aa Chevelle is a Canadian car with Special Paint (Daytona Yellow) and GM canada paper show ZP3 The digit 8 and the 18 is a little bit bigger than the other digit. Other Copo Velle have a digit in the top corner ????? if it can help you. [Edited by copo9566aa (03-05-2002 at 03:39 AM).] |
|
#2
|
|||
|
|||
|
Now we are getting somewhere...tell me about this trim tag:
<FONT size="4"> </FONT s> [Edited by Chevy454 (03-03-2002 at 01:44 PM).] |
|
#3
|
|||
|
|||
|
<FONT size="4">
</FONT s> Stephane Copo Tag [Edited by sYc (03-03-2002 at 02:33 PM).] [Edited by copo9566aa (03-05-2002 at 03:23 AM).] |
|
#4
|
|||
|
|||
|
I edited the above post, using the UBB "code" tags, which maintains the same spacing as when you type it up (like I used on the trim tag I posted). Does that look pretty close? If not, just edit it, but leave the code tags.
|
|
#5
|
||||
|
||||
|
My orange COPO has a 9 in the right corner of the cowl tag and an 8 in the same place as everyone else has below the build date and the special order #.
<FONT size="4"> </FONT s> [Edited by sYc (03-03-2002 at 05:54 PM).] |
|
#6
|
|||
|
|||
|
a Canadian SS Chevelle Hugger Orange Tag
<FONT size="4"> </FONT s> [Edited by sYc (03-03-2002 at 05:57 PM).] |
|
#7
|
|||
|
|||
|
The numbers in the upper right and the "8" in the lower left of the trim tag, I have seen on other Chevelles besides COPOs. I have seen numbers in the upper right that looked like they were stamped on the trim tag after it was installed on the cowl.
Rob's Yenko Chevelle has an "S" for Midnight Green vinyl top. This is the only Grn top I have seen on a Yenko Chevelle. There does not seem to be as big of a data base of trim tag numbers collected for the Chevelle as for Camaros and Corvettes. I am not sure what the "8" is for. It had to be for something where the operation had to be done during Fisher body assembly before it went to the main assembly line. |
![]() |
|
|