1969 phase III Corvette

[69motion]

white top the car was origanally gold with a black stripe .ive talked with the orig owner many times he says he remembers seeing one photo but to date hasnt found it. he is very nice and is in the process of trying to find any more paper work, his copies of bm paper work ,registrations ect. .

[JoeC]

The Motion cars are fairly well documented in the east coast magazines such as Hi Performance Cars and Speed & SuperCar. Do you have a Motion Phase III GT with the fast back flat glass rear window or a Phase III Corvette with the stock body? Some of the cars had the stripe like the white & black ZL1 and others had a wider stripe around the tail section. here is a link to a magazine cover
http://albums.photopoint.com/j/View?...132&p=28397669

[Chevy454]

While doing research on our Vega, through vintage mags, articles, etc, we came to this conclusion. There is no one right way to do the stripes, as each car seems to be a little(sometimes a lot) different. Joel has been quoted a saying that several different body shops did the work and were not held to strict guidelines. Tom

[69motion]

joe ,thanks for the pick that will help out alot my car is identical to the one in the picture except it has orig headlights and no fastback rear

[SuperCars]

69 Motion, my 69 motion vette is a Phase III with original headlites and rear glass also. As you probably know; the fastback rear glass and enclosed headlites was the GT version. (I always thought that the GT version looked like an overgrown Opel Kadett)Anyway I can try to measure my stripes and give you some type of guideline. Just as someone has already said though; most likely no two cars from Baldwin Motion were the same. Kevin

[JoeC]

Here is a picture of another Phase III GT with a wide stripe over the gas tank area and around the tail section. This is the car with the Dodge filler cap that was mentioned here on another post. It is in process of restoration. I think most of the cars used the aftermarket filler cap made by Grant or somebody. The width of the stripe on the hood and roof should be pretty easy since it was about as wide as the scoop opening.

[69motion]

joe thank u for the pic, kevin if you could measure the strips that would be great also during conversation with the orig owner he said he ran blue streak tires in the rear was this a motion option or a owner option the owner memory isnt perfect thanks jeff