Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
|
|
#1
01-14-2025, 03:57 PM
|
||||
|
||||
I'll dig out the windows and remove the fasteners for pics and measurements in the next couple days.
__________________
Mitch 1970 Chevelle SS 1966 Chevelle SS 1967 Camaro ss/rs 1938 Business coupe, street rod 2000 FXSTS, original owner, 13k miles 
|
|
#2
01-14-2025, 09:28 PM
|
||||
|
||||
|
OK, I found the windows easily, but it took a bit to extricate them from where they were set down over a year ago...
 The 2 that hold the lower channel to the frame are not bolts. They have round heads, so I suspect the pic is a general depiction of a fastener. They are 12X24 thread and 1/2" long. The small screw at the top is a common one I see for things like this, but are rather specialized. The head is countersunk and small and the threads are more like a sheetmetal count, as they seem to be 17 TPI. The 16 gauge is just a little too wide. The length is about 5/16".
__________________
Mitch 1970 Chevelle SS 1966 Chevelle SS 1967 Camaro ss/rs 1938 Business coupe, street rod 2000 FXSTS, original owner, 13k miles
|
| The Following 3 Users Say Thank You to Too Many Projects For This Useful Post: | ||
 |
|
|
Hybrid Mode
