Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
|||||||
| Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
|
|
Thread Tools | Display Modes |
|
#24
|
|||
|
|||
|
As for the math on the trans:
Right now, with .71 OD in fifth gear my RPM at 75 MPH is 2190. If I did the conversion (at about $2000 even doing everything myself) I would have a .61 sixth gear and would drop cruising RPM to 1878. Might make sense with 4.10 rear gears, but makes no sense with the 3.73. I have no trouble getting underway with the 3.10 first gear. Happy with it just the way it is. Serviced the trans yesterday using TranSynd. Wish there were a way to tell for certain what fluid was in it. Had a really crappy aftermarket spin-on filter on it, but I don't THINK the pan had ever been off. Just to make certain I get as much of the old fluid out as possible (without using a very expensive pump set up) will drive it a few days, then do a drain and fill one more time. Man, the underside of this truck is clean. Also, it drives great with the new Bridgestone V-Steel tires. Gary made me a helluva deal on those, and I am very thankful.
__________________
Don't believe everything you read on the internet ... Ben Franklin |
| The Following User Says Thank You to Lynn For This Useful Post: | ||
olredalert (10-27-2024) | ||
|
|