08-03-2024, 08:32 PM
|
 |
Senior Member
|
|
Join Date: Jul 2008
Location: SoCal
Posts: 425
Thanks: 362
Thanked 474 Times in 99 Posts
|
|
Quote:
Originally Posted by Too Many Projects
Tapping the steering arms is a better option, but you may want to go all the way thru and use the stop threads as filler. I would look into repop stops made of rubber, as urethane doesn't really give on contact to soften the force of the steering arm against the tube. If you find a good solution, I may have to "borrow" it...  |
I'm thinking of just drilling and tapping them about 1/4"-3/8" deep, and using Loctite to keep it from backing out. The stock steering stops are little "bumps" on the lower a-arms, metal to metal. So I think the poly stop I'm thinking of using would be adequate and not too "harsh"?
__________________
I ain't as good as I once was, but I'm as good once as I ever was.
|
Hybrid Mode
