Not a muscle car but my next project

[napa68]

Originally Posted by Too Many Projects

Do you have an actual pcv in that line, to limit the amount of air the carbs can pull thru ?

Exactly. On my 65 fuel injected car, it does not have a PCV valve. BUT......there is an elbow what has a .090 hole to draw a vacuum in order to ventilate the crankcase.

[jasonL78]

The line does have a PCV valve in line. I had a guy add that for me when he built my linkage. A real good idea but he tapped the line into intake below throttle plates and guess what, this intake has an oil fill tube with a breather. Instant vacuum leak.This is why I couldn't adjust idle with mixture screws. While driving it and trying to stop all it did was stall. I have it pretty much set now. I just have to tap my back carb above the throttle plate is what I was thinking to add the PCV back in.