69 Chevelle from N/J

[Zman1969]

Originally Posted by Woj

AMK has some nice J clips that you can use for the heater box.

https://www.amkproducts.com/bulk-fas...forlookup=7710

B10256

Thanks Woj! I have couple but wasn't sure what studs got them as per your pic they are different than my Camaro.

So I took the car out yesterday while it was cooler here to do a shakedown drive and ran pretty well except for the carb - secondary's just dump and bog it down , need to play with spring and set screw, but temp was fine with a stainless flex fan, even without a shroud on it. car floats around needs upper control arm bushings as the age has taken its toll and I have another plastic weld to attempt.