Go Back   The Supercar Registry > General Discussion > Technical & Restoration


Reply
 
Thread Tools Display Modes
  #1  
Old 08-10-2023, 12:37 AM
iluv69s iluv69s is offline
Yenko Contributing Member
 
Join Date: Apr 2007
Location: usa
Posts: 2,510
Thanks: 68
Thanked 324 Times in 137 Posts
Default

I’ve added RS package to a few 69’s over the years. Anyone can splice or cut very nice holes for RS backup lights. The vaccuum canisters etc with correct holes thru inner fenders are quick check. The hardest part is the hose routing with the hole in the firewall and all of the hose routings to the correct RS headlight switch and headlight washers, etc. If it has the correct RS hoses through the firewall etc. it sounds like it is either original RS or it may not matter if it was converted correctly.

There is no way to tell original RS from just the VIN or cowl tag. Some X codes on the cowl tag would eliminate RS as possibility also. X-44, X-22, X-77 ( I think I have that right)

Last edited by iluv69s; 08-10-2023 at 12:40 AM.
Reply With Quote
  #2  
Old 08-10-2023, 01:16 AM
Too Many Projects's Avatar
Too Many Projects Too Many Projects is online now
Yenko Contributing Member
 
Join Date: Oct 2020
Location: Town of Troy, WI
Posts: 5,044
Thanks: 2,639
Thanked 3,898 Times in 1,758 Posts
Default

The tail panel may have been replaced in the past too, like I just had to do to my original rs car. The panel had been spliced thru the left tail light. The left reverse hole was stamped and the right horribly cut. They are now both neatly cut, but obviously not stamped, as original.
__________________
Mitch
1970 Chevelle SS
1966 Chevelle SS
1967 Camaro ss/rs
1938 Business coupe, street rod
2000 FXSTS, original owner, 13k miles
Reply With Quote
  #3  
Old 08-10-2023, 05:03 AM
COPO COPO is offline
Yenko Contributing Member
 
Join Date: Mar 2000
Location: Atlanta, GA & the Middle East
Posts: 3,022
Thanks: 400
Thanked 377 Times in 201 Posts
Default

Quote:
Originally Posted by iluv69s View Post
I’ve added RS package to a few 69’s over the years. Anyone can splice or cut very nice holes for RS backup lights. The vaccuum canisters etc with correct holes thru inner fenders are quick check. The hardest part is the hose routing with the hole in the firewall and all of the hose routings to the correct RS headlight switch and headlight washers, etc. If it has the correct RS hoses through the firewall etc. it sounds like it is either original RS or it may not matter if it was converted correctly.

There is no way to tell original RS from just the VIN or cowl tag. Some X codes on the cowl tag would eliminate RS as possibility also. X-44, X-22, X-77 ( I think I have that right)
X66 is not an RS. X-22 could be an RS.

From CRG site:

The Z21 Style Trim group was part of the Z22 Rally Sport option, so RS cars are part of the group with the Z21 style trim option. Thus RS cars can only be X11, X22, or X33.

X11, X22, or X33 cars have to have style trim, but from the code you can't tell if the car also had RS.

X44, X55, X66, and X77 cars cannot have the Rally Sport (or style trim) option.

Last edited by COPO; 08-10-2023 at 05:11 AM.
Reply With Quote
  #4  
Old 08-10-2023, 12:00 PM
X66 714's Avatar
X66 714 X66 714 is offline
Yenko Contributing Member
 
Join Date: May 2009
Location: It's a dry heat, Arizona
Posts: 1,939
Thanks: 3,358
Thanked 1,208 Times in 494 Posts
Default

I did my X66 car back in 1982. Nobody could tell the difference except those who knew the codes. Everything looked & operated correctly. I went back to original during my last restore...Joe
__________________
1968 Z/28 Corvette Bronze. Black Hounds Tooth. 02E Los Angeles born 3/13/1968 pnt OO
1969 SS396 Yellow/Yellow 08E Norwood born 8/28/1969 pnt 76E
1970 'cuda Moulin Rouge, 440-6, 4 speed
Reply With Quote
The Following User Says Thank You to X66 714 For This Useful Post:
Xplantdad (08-10-2023)
  #5  
Old 08-11-2023, 01:24 AM
70LS6454 70LS6454 is offline
Yenko Contributing Member
 
Join Date: May 2003
Location: Maryland
Posts: 292
Thanks: 34
Thanked 33 Times in 27 Posts
Default

The vacuum canister is definitely missing and didn't see any of the related hoses. I will try and get a closer look at the firewall. Thanks for all the information.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 11:42 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.

O Garage vBulletin Plugins by Drive Thru Online, Inc.