Preservation of a 68 Camaro

[jbtech]

Finished up the trimming the carpet, installed the firewall trim cover, kick panels and seal plates. I'm pretty happy with the results of the carpet. Ordered ACC from Speedway Motors for right at $200 with free shipping. Lays nice and very little needed to be trimmed. I actually like the fact the dimmer switch grommet wasn't installed as it allowed for a cleaner fit.


Photos 729 - 730 - As mentioned carpet, trim cover, kick panels and seal plates installed.

Photos 731 - 732 - Cont.

Photos 733 - 735 - Cont.

Photo 736 - 737 - E brake assembly installed.

Photo 738 - Confirming dome light works as it should


Bentley came through with the backup light socket. Got it cleaned up and installed. Now both backups work. Ignore the led light as I didn't have a standard on hand when testing.

Photos 739 -740 - Socket

Photos 741 - 742 - Installed and working


Pulled the cluster and replaced the bulbs.

Photo 743 - Lights off

Photo 744 - Lights on


Photo 745 - Ignition in the run position. Brake light being on is due to testing the circuit along with the lights. One thing I just realized I failed to do was ground out the oil warning light which I will do at another date.

Photo 746 - Ignition in start position

Photo 747 - Ignition in acc position