Preservation of a 68 Camaro

[cook_dw]

Previously removed the steering column for clean up and turns out the lower bearing was trash so it'll get a disassembly, clean and new lower and since they do not sell the bearing for the upper and since it is staked into the aluminum housing it would be a possible issue but thankfully the upper bearing on mine was good just needed repacking with grease. Lower bearing was ordered from Ground Up (ss396.com).


Photo 613 - 616 - column removed and disassembled and of the column decal

Photos 617 - 626 - Paint markings on inner tube & main shaft etc.

Photos 627 - 629 - Tolerance ring & spring before and after

Photos 630 - 632 - Lower bearing compared to new replacement