![]() Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
![]()
I guess I need to read the thread a little closer too. I can't recall the headlight bucket sequence off hand. The headlights themselves only fit correctly into the appropriate bucket. The last time I did these, I put low beams and high beams in their correct buckets to identify where they needed to be positioned. If the ones you are using came out of the car you are assembling, then this should work. I have some NOS buckets in the basement, I'll try to locate them and see if I can offer more help with part numbers and locations.
PS. I also can take a 20 minute project and turn it into a 2 day project. |
#2
|
|||
|
|||
![]()
Have a 69 chevelle front apart, headlight buckets have A On outer low beam and B on inner high beam same markings left side and right side, hope this helps. Tony
|
![]() |
|
|