Mallory Rev Pol system

[cook_dw]

You will need a rev Pol distributor to be technically correct but it appears they setup that 310 to potentially work as a rev. The YC310 is the standard distributor. I have a rev Pol distributor in the garage that I need to restore.


Read through this thread to see if it helps any.

https://www.jalopyjournal.com/forum/...estion.111336/

[R68GTO]

Originally Posted by cook_dw

You will need a rev Pol distributor to be technically correct but it appears they setup that 310 to potentially work as a rev. The YC310 is the standard distributor. I have a rev Pol distributor in the garage that I need to restore.


Read through this thread to see if it helps any.

https://www.jalopyjournal.com/forum/...estion.111336/

Thanks for the link Darrell. Are you referring to the jumper wire between the two condensers as the modification to make it work like a Rev Pol? The SuperMag transformer has another terminal under that red cap, is that used when you need a double coil?