LT1 camshaft suggestions?

[frankk]

Thanks Lynn for the reply. I have only 2nd hand experience with LT1 power and that comes with watching LT1's at the drag strip. I want to find something that will wind up there and also have a very, very lumpy idle, crackely lumpy

[John Brown]

Here is some good reading on camshaft choice for street driven small blocks.

a-tale-of-two-camshafts-st-louis-ncrs

[napa68]

Originally Posted by John Brown

Here is some good reading on camshaft choice for street driven small blocks.

a-tale-of-two-camshafts-st-louis-ncrs

This is a great article to take note from. One of the fellows who penned this article, I have come to know through the years. There is a good amount of common sense knowledge that avoids the typical magazine camshaft of the week BS.

It explains why these LT-1's just flat scream and have manners at the same time.

I'm sure there are others here that have different opinions (which is fine). This just happens to be mine from a good amount of past experience.

Tim