Ed Hedrick Yenko Camaro

[Unreal]

Originally Posted by yenko69

Hello guys, where I could find the positioning all emblems for a 69 Yenko Camaro, fender hood and rear panel, i look for the exact position. Thanks

There are two holes on a diagonal, in the rear panel for the standard bowtie emblem. You drill one hole to the left of the upper left hole, and one hole to the right of the lower right hole. "Yenko" goes into the left pair of holes, and "427" goes into the right pair of holes.

The hood and fender holes are less precise, as they were installed by high school kids on the weekends. No two are the same, but the "427" was normally placed roughly in the middle of the raised area of the cowl hood, and the "Yenko" on the fender was normally placed so the middle point of the crest is about 1/2" below the bottom of the Camaro script, and about midway between the M and A in CaMAro.