ribbed pvc hose

[68camaroz28]

Originally Posted by ALLZS

dose anyone sell or reproduce the 3/8 pvc hose with the 90% bend in it

PCV hose did not have ribs that I’m aware of. GM was still selling that hose a few years back but the ink stamping needs to be removed.

[Steve Shauger]

I have several samples of original ribbed PCV hoses.

[X66 714]

I purchased ribbed pcv hoses from Doc Corvette also. Pretty good quality...Joe

[Steve Shauger]

Originally Posted by Steve Shauger

I have several samples of original ribbed PCV hoses.

The pictured on left was from a 50K mile 69 Z28. The one on the right is from my 67 L78, which unfortunately was shortened when an 850 holley was installed that had the PVC port in the front.

[BCreekDave]

Originally Posted by Steve Shauger

The pictured on left was from a 50K mile 69 Z28. The one on the right is from my 67 L78, which unfortunately was shortened when an 850 holley was installed that had the PVC port in the front.

You may want to move that clamp down to the installed position. Long term in that location will leave a permanent impression on the hose. Ask me how I know.

[68camaroz28]

Originally Posted by Steve Shauger

I have several samples of original ribbed PCV hoses.

Screwed up! I just checked my survivor list and yes, Skip's 69Z has the ribber hose so I was wrong! Is it normal to see both types on a 69 or only ribbed and what about 68's?