1955 Pontiac LS upgrade

[kwhizz]

Got the Floor patch panel welded in today and got the drivetrain delivered to the house...… I thought I was going to be able to save Jeff and Judy some $$ by being able to use the as delivered oil pan..…… Wrong...…. Luckily I have a new 302-2 Holley pan in the garage...….. It will have a new home shortly...….



LS3 480H.P. 4L70E trans......

[kwhizz]

Got the engine mount adaptor plates installed along with getting the pan changed ……..

[kwhizz]

Well..... Got the engine in and now that wide open engine compartment is getting full...… Mainly on the driver side....When Jeff had the car converted to 4 wheel disc brakes previously.....they used the space available with the SBC in place while changing from the floor pedal to the firewall mount power system.....So...… A couple of things popped up after getting the LS 3 in place...#1... I think we may have to change the power booster assy over to a Hydro-Boost system to gain needed space (Vacuum Booster and Coils are fighting for the same space) to provide the needed space and still provide Judy with the Braking she needs...…… #2...…. I installed a Holley 302-2 pan.....Thought there would be plenty of room...…. LOL....We will have to change the pan out to a 302-1...… (Centerlink hit's the -2 pan while going thru the steering range..... The -1 has an additional 1 1/2 clearance)…… The sump area is shorter on the -1 pan......Things you find out as the process continues.....Darn !!!!………. I'm making a new trans crossmember tomorrow so that with get the engine mounting completed...…Also it seems like there is going to be a major clearance issue with the driver side exhaust The next problem for another day...….. Two steps forward, one step back...…..