427 GM Deep Performance Oil Pan - 6 quart GM #3879633

[68 DANA]

NOS oil pan, windage tray and corresponding oil pump have been found!

[Hawkeye]

Congratulations!!! Did you also get the studs for the windage tray.
I would like to know the length of them. Also if you could post some photos that would be great.
Thanks,
Marty

[68 DANA]

Originally Posted by Hawkeye

Congratulations!!! Did you also get the studs for the windage tray.
I would like to know the length of them. Also if you could post some photos that would be great.
Thanks,
Marty

Here you go Marty. The long bolts are 5-5/8" in length and the short bolt is 3-1/4" in length. I hope this helps. Let me know if you need anything else.

[Hawkeye]

Thank you for the photos and the measurements. Does the NOS oil pump and tube have any markings different from the photos previously posted?
Congrats again on your finds.

Thanks,
Marty

[RALLY]

Originally Posted by 68 DANA

NOS oil pan, windage tray and corresponding oil pump have been found!

That oil pan did not use the flat Corvette Windage tray. It used the curved windage tray 3879640. This is the correct windage tray number. I use to own 3 windage trays for this 633 oil pan.