Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
|||||||
| Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
|
|
Thread Tools | Display Modes |
|
#11
|
||||
|
||||
|
Been nibbling away at more work on the Camaro the last couple days. Also managed to sneak down to Montana on another parts run where I picked up some NOS rocker spears, NOS trunk seal and also picked up a minty set of NOS window felts yesterday. We got the front sway bar installed (forgot to powder coated it earlier) and installed a few more brake parts including some original e-brake hardware that was phosphate coated. Today we changed out the rear quarter window channels as the originals were not up to par.
While at it we then swapped out all the window felts as the repro stuff was horrible. Headlamp trim was completed today and the car's now ready for front and rear bumpers. On tomorrows docket, we'll finish installing the heater core, bleed the brakes and button up a few little things under the car. At that point we're ready to drop the freshly built 302 into the car and get the transmission and shifter mounted up. Before long, the console will be going in, the carpet will be trimmed and the rest of the interior can start going together. boogity boogity ![]() ![]() Headlight bezels restored ![]() NOS Rocker Spears ![]() NOS Window Felts ![]() NOS Trunk Seal
__________________
I like solid lifter cars, big cams and cars w/ 3 pedals in them.
Last edited by NorCam; 10-21-2019 at 05:36 PM. |
| The Following 3 Users Say Thank You to NorCam For This Useful Post: | ||
|
|