Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
|
|
#1
02-12-2019, 06:40 PM
|
||||
|
||||
Intake gaskets are set and I'm ready to mount the Crossram, but first comes the new gauges and a 90 degree fitting for the oil pressure gauge. Forgetting to install this BEFORE you install a Crossram intake will cause you some hardship. Ask me how I know this...lol. Anyway, added the 90 fitting to get the line connected and now I'll mount the lower base. Here's a few pics to update the thread.
 Installing the oil fitting ahead of the lower base which overhangs the rear of the block.  You need a 90 fitting back here or the oil line won't fit under the rear lip of the intake as it overhangs the block.  New SW Green Classic Gauges mounted up under the dash.
__________________
I like solid lifter cars, big cams and cars w/ 3 pedals in them. 
Last edited by NorCam; 02-13-2019 at 02:10 PM. 
|
| The Following User Says Thank You to NorCam For This Useful Post: | ||
Xplantdad (02-12-2019) | ||
 |
|
|
Hybrid Mode
