One of the first questions the 2nd owner's son had after we arrived was "is there a dent in the floor pan under the back seat on the drivers side? When I told him there was, he proceeded to tell me that his Dad blew a driveshaft during a run and it hit the floor pan so hard that it dislodged the rear seat from the bracket on the driver side.
I was also able to confirm that they had added the engine torques bracket to the front subframe. I assumed a piece of chain was used between the bracket and the engine, but was told that they used a piece of flat stock instead of chain. I guess I need to ditch the chain I added and make a piece of flat stock!
Below is a photo of the 2nd owner's son holding his Dad's helmet that was painted to match the car & photos of the same guy with the guy that painted the car back in 1971. Just a note on the year.....while going through some other photos they had of the car just out of paint, the Kodak paper on the back has a 5/70. Now I'm wondering if it wasn't 1970 when the car was painted? I'll do a separate post about the scrap book he loaned to me.....lots of cool stuff in there too.
One of these days I'll figure out how to get these photos rotated correctly
07-03-2018, 11:14 PM
Threaded Mode